STEDI Ford Ranger & Everest Lower Grill Light Bar Mounting Bracket
Available in 3 different options:
-
(A) PX II / PX III / Everest - No Tech Pack
Suitable for our ST3K 21.5" LED lightbar -
(B) PX III / Everest - Tech Pack: Centre
This setup comes with an additional bracket, as they are intended to fit 2 x ST3K 11.5" LED lightbars
DESCRIPTION
ENGINEERED TO SUIT RANGER | EVEREST
Specifically designed to fit Ford Ranger MK2 (PX2) & Everest 2015 to current all sub-models including XL, XLS, XLT, Wildtrak & FX4 | Trend, Ambiente & Titanium. Perfectly fits the STEDI ST3K 21.5" Light Bar in the lower grille opening. This is the graceful & robust lower grill mount you've been waiting.
AFTERMARKET YET COHESIVE
The Everest & Ranger is one of few utes on the market that has an attractive front-end right out of the box. Every detail of the lower grill mount has been carefully considered to ensure that depth & height remains cohesive with the overall front-end design. The end result is a perfectly located light bar that strikes the ideal balance between aftermarket & original equipment vibe.
INTELLIGENT DESIGN - BOLTS ON IN 25 MINUTES
We’ve spent time designing and testing to ensure that the installation is fast & reliable. In fact, we expect a moderate DIY’er to nail this in 25 min. No drilling, no cutting and no compromises. Manufactured from 3mm thick powder-coated stainless steel and folded in all the right places to ensure a vibration-free installation.
LOWER GRILL VARIANTS
THE NITTY GRITTY
Designed to fit Ford Ranger MK2 (PX2) & Everest 2015 to 2018 (UA Chassis) all sub-models including XL, XLS, XLT, Wildtrak & FX4 | Trend, Ambient, Titanium. Will also fit Ford Ranger Raptor and the newer PX3 Ranger without a radar box in the lower grill.
Ranger Raptor and PX3 (XLS only) require two holes to be drilled in the lower steel support as the pre-existing mounting holes are absent.
Manufactured with 3mm Stainless Steel with satin powder coat, and designed to be fastened to pre-existing holes which are already present on the inner steel support. This is a completely non-intrusive install meaning that no new holes need to be made, nor do sections of the front bumper need any cutting or modifying.
The end result is a very robust, stealthy installation.
The design is optimised to suit our STEDI ST3K 21.5" LED Light Bar.
- Black Powder Coated Finish
- 3 Series Stainless Steel
- Designed to minimise disruption of air-flow
- No need to remove the front bumper
- Bolts to pre-existing holes
- No drilling required, bolt and nut kit included (Excluding PXIII and Everest with Tech-Pack in the centre)
The price is for brackets only, light bars are sold separately.
TECH SPECS
| MATERIAL | 3 series Stainless Steel |
| FINISH | Powder Coat |
WHAT’S IN THE BOX
- 1 x Set Ford Ranger / Everest Lower Grill Mounting Bracket
- 2 x Stainless Steel Bolts
- 2 x Flat Stainless Steel Washer
- 2 x Nylock Nut
INSTALLATION GUIDE
Original: $105.00
-65%$105.00
$36.75Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Available in 3 different options:
-
(A) PX II / PX III / Everest - No Tech Pack
Suitable for our ST3K 21.5" LED lightbar -
(B) PX III / Everest - Tech Pack: Centre
This setup comes with an additional bracket, as they are intended to fit 2 x ST3K 11.5" LED lightbars
DESCRIPTION
ENGINEERED TO SUIT RANGER | EVEREST
Specifically designed to fit Ford Ranger MK2 (PX2) & Everest 2015 to current all sub-models including XL, XLS, XLT, Wildtrak & FX4 | Trend, Ambiente & Titanium. Perfectly fits the STEDI ST3K 21.5" Light Bar in the lower grille opening. This is the graceful & robust lower grill mount you've been waiting.
AFTERMARKET YET COHESIVE
The Everest & Ranger is one of few utes on the market that has an attractive front-end right out of the box. Every detail of the lower grill mount has been carefully considered to ensure that depth & height remains cohesive with the overall front-end design. The end result is a perfectly located light bar that strikes the ideal balance between aftermarket & original equipment vibe.
INTELLIGENT DESIGN - BOLTS ON IN 25 MINUTES
We’ve spent time designing and testing to ensure that the installation is fast & reliable. In fact, we expect a moderate DIY’er to nail this in 25 min. No drilling, no cutting and no compromises. Manufactured from 3mm thick powder-coated stainless steel and folded in all the right places to ensure a vibration-free installation.
LOWER GRILL VARIANTS
THE NITTY GRITTY
Designed to fit Ford Ranger MK2 (PX2) & Everest 2015 to 2018 (UA Chassis) all sub-models including XL, XLS, XLT, Wildtrak & FX4 | Trend, Ambient, Titanium. Will also fit Ford Ranger Raptor and the newer PX3 Ranger without a radar box in the lower grill.
Ranger Raptor and PX3 (XLS only) require two holes to be drilled in the lower steel support as the pre-existing mounting holes are absent.
Manufactured with 3mm Stainless Steel with satin powder coat, and designed to be fastened to pre-existing holes which are already present on the inner steel support. This is a completely non-intrusive install meaning that no new holes need to be made, nor do sections of the front bumper need any cutting or modifying.
The end result is a very robust, stealthy installation.
The design is optimised to suit our STEDI ST3K 21.5" LED Light Bar.
- Black Powder Coated Finish
- 3 Series Stainless Steel
- Designed to minimise disruption of air-flow
- No need to remove the front bumper
- Bolts to pre-existing holes
- No drilling required, bolt and nut kit included (Excluding PXIII and Everest with Tech-Pack in the centre)
The price is for brackets only, light bars are sold separately.
TECH SPECS
| MATERIAL | 3 series Stainless Steel |
| FINISH | Powder Coat |
WHAT’S IN THE BOX
- 1 x Set Ford Ranger / Everest Lower Grill Mounting Bracket
- 2 x Stainless Steel Bolts
- 2 x Flat Stainless Steel Washer
- 2 x Nylock Nut
INSTALLATION GUIDE
